Direct Part Marking (DPM) is a process that allows users to imprint a bar code directly on an item instead of printing the code on a paper label. Different technologies are available to directly mark objects: laser / chemical etching, dot peening and ink jet printing. Each of these methods has specific advantages and disadvantages in terms of durability, cost and ease of reading.
The PowerScan™ 9530 is a feature-rich and rugged area imager reader. It is offered in several different models to better fit the different needs of each customer.
Specification of PowerScan PD9530DPM/HP/STD
| Dimensions | Height: 212 mm,Length: 110 mm,Width: 74 mm |
| Weight (without cable) | 330 gr (without cable) |
| Voltage & Current | PD9530/PD9530-HP,PD9530-HPE,PD9530-DPM, |
| Input Voltage | 5 VDC +/-5%,10 to 30 VDC,5 VDC +/-5% |
| Operating (typical): | 335mA,135mA @10V,350mA |
| Operating (max): | 475mA,300mA @10V,480mA |
| Idle/Standby(typical): | 180mA, 60mA @ 10V,120mA |
| Light Source: | LED |
| Interfaces Supported: | RS-232, Keyboard Wedge, and USB. See page 5 for a listing of available interface options. |
| Operating Temperature: | -4° to 122° F (-20° - +50° C ) |
| Storage Temperature: | -40° to 158° F (-40° to 70° C) |
| Humidity: | 0 to 95% non-condensing |
| Drop Specifications: | Scanner withstands >50 times 6.5 (2 m) drops to concrete |
| Ambient Light Immunity : | 100,000 Lux |
| Beeper/Speaker : | >= 80 dB @ 10 cm |
| Electrical Safety : | UL 60950, CSA C22.2 No. 60950, IEC 60950 |
QuickScan QW2120
PowerScan PM9300
PowerScan PBT9300
PowerScan PD9330